Billet Machined 1/10 VFX2.2 Roll Cage Type Trail Racer 4WD Scale Crawler ARTR C25798GUN

4.0 | 1 review | submit yours

Billet Machined 1/10 VFX2.2 Roll Cage Type Trail Racer 4WD Scale Crawler ARTR C25798GUN

$538.35

OVERVIEW
Create your own dirt-conquering machine by starting with our full alloy, full upgrade, pre-assembled 1/10 Billet Machined VFX 2.2-Class Trail Racer ARTR! This race-ready machine can power its way across terrain that would normally stop other vehicles, and the realistic scale-looking steel roll cage chassis design will gather attention no matter where the trail takes you. The VFX 2.2 features an alloy gearbox and alloy axles that feature all metal internals with ball bearings for smooth rolling. HD universal slider shafts transmit the motor power to HD drive axles. An adjustable slipper clutch keeps torque in check, and on each corner you'll find adjustable, oil-filled alloy shocks with adjustable shock mounting positions. Rounding out the VFX 2.2 is a pre-trimmed panel body set (paint it however you wish), roof-mounted metal luggage tray with LED spot lights, and large 2.2' Pre-mounted high grip crawler tires on alloy wheels. The VFX is available in black, gunmetal, red, or silver color schemes.

NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only.

Item# C25798GUN Barcode: 91789020869

Stock: Low Stock Sku: C25798GUN

Customer product review

4.0 rating based on 1 review

Very happy

4.0 rating

First off the quality is overall great. One thing I would like to note though is that the front of the frame bumper area hits the servo just before full shock compression. Have not found a working solution just yet for this issue. Lowering is not an option due to this. I know that many like to lower there rigs. As long as this is used as a crawler I do not see this being a problem for most unless lowering. I may mod the frame, get a new one or even just build another down the road to make the adjustment. I was going to build piece by piece and found that it would cost over twice as much for the same parts more or less so a few changes in parts still make it worth it. Also with this you must go over every nut, bolt screw and even lube internal gearing. I used thread locker CA glue and even epoxy which was used on the lower links where the plastic meets the metal rod. Yes there is some plastic but very little. Mainly at the joints for the linkages on the steering and four link. I would go over everything then run it as it was intended then go over everything again looking any issues. Overall this was well worth it and I would buy again.

OVERVIEW
Create your own dirt-conquering machine by starting with our full alloy, full upgrade, pre-assembled 1/10 Billet Machined VFX 2.2-Class Trail Racer ARTR! This race-ready machine can power its way across terrain that would normally stop other vehicles, and the realistic scale-looking steel roll cage chassis design will gather attention no matter where the trail takes you. The VFX 2.2 features an alloy gearbox and alloy axles that feature all metal internals with ball bearings for smooth rolling. HD universal slider shafts transmit the motor power to HD drive axles. An adjustable slipper clutch keeps torque in check, and on each corner you'll find adjustable, oil-filled alloy shocks with adjustable shock mounting positions. Rounding out the VFX 2.2 is a pre-trimmed panel body set (paint it however you wish), roof-mounted metal luggage tray with LED spot lights, and large 2.2' Pre-mounted high grip crawler tires on alloy wheels. The VFX is available in black, gunmetal, red, or silver color schemes.

NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only.

Item# C25798GUN Barcode: 91789020869

You May Also Like

Featured Products