The Camel Trophy, held from 1980 to 2000, was a unique vehicle adventure event. Instead of prioritizing speed, it tested the endurance of both participants and their vehicles in harsh conditions. With a strong focus on teamwork and resilience, it was often entitled 'The Olympics of 4x4.' Every off-road enthusiast dreamed of participating. To capture the essence of Land Rover's Camel Trophy in 1/24 scale, we use ABS hard plastic car casings to faithfully reproduce vehicle details and body colors. Each of the four models comes with its own roof rack, which can be optionally equipped with scale parts like fuel drums, spare tires, equipment boxes, and recovery boards. This helps you better understand and experience the spirit and history of the "Camel Trophy." The FCX24M is currently one of the only 1:24th scale crawler cars on the market to come with a factory-installed two-speed transmission. This means you'll experience an unprecedented level of fun with this car compared to traditional small-scale crawlers. When the two-speed transmission is included as a standard feature in the FCX24M series of crawlers, you'll find it incredibly exciting! While meeting the needs of realistic crawling with low-speed high-torque output, the addition of a high-speed gear gives the FCX24M an exhilarating sense of speed and an impressive off-road control experience. Introducing the new FCX24M chassis for the Land Rover Family. These models are in the standard 1/24 scale and feature powerful 050 motors, a two-speed transmission, and a robust metal frame chassis for exceptional performance. With four-link front and rear suspension, metal gears, bearings, and oil-filled shock absorbers, they offer superior driving experiences indoors or outdoors. Length: 232mm Item# FMS12483RTRYL Barcode: 91789047141FCX24M Land Rover Camel Trophy Edition
Great Performance Begins With Authentic Looks
Two-Speed Transmission
FCX24M - Small In Size, Big In Fun
Features
Specifications
Width: 105mm
Height: 133mm
Wheelbase: 134mm
Tyre F/R: Φ 48*17mm
Minimum Ground Clearance: 28mm
Approach Angle: 52°
Departure Angle: 55°
Motor: 050 35T Brushed motor
Remote Control Distance: 30m
Approx. Operating Duration Time: 20mins
Remote Control: G3 Transmitter V3 with R3A ReceiverWhat’s Included
Need to Complete
Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.
Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.
Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.
Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.
